Filter
Top Products
Table 2-6 Fax setup menu (continued)
Menu Item Sub-menu item Sub-menu item Description
Fax Send setup Def. Resolution Fine
Superfine
Photo
Standard
Sets the resolution for sent documents. Higher resolution
images have more dots per inch (dpi), so they show more
detail. Lower resolution images have fewer dots per inch
and show less detail, but the file size is smaller.
Changing the resolution setting might affect the fax speed.
Def. light/dark Sets the darkness of outgoing faxes.
Def. Glass size Letter
A4
Sets the default paper size to use when scanning and
copying from the flatbed glass.
Dialing Mode Tone
Pulse
Sets whether the product should use tone or pulse dialing.
Redial if busy On
Off
Sets whether or not the product should attempt to redial if
the line is busy.
Redial-no
answer
On
Off
Sets whether the product should attempt to dial if the
recipient fax number does not answer.
Redial Comm.
Error
On
Off
Sets whether the product should attempt to redial the
recipient fax number if a communication error occurs.
Dial Prefix On
Off
Specifies a prefix number that must be dialed when sending
faxes from the product.
Detect dial tone On
Off
Sets whether the product should check for a dial tone
before sending a fax.
Fax Recv. setup Answer mode Automatic
TAM
Fax/Tel
Manual
Sets the type of answer mode. The following options are
available:
●
Automatic: The product automatically answers an
incoming call on the configured number of rings.
●
TAM: Use this setting when a telephone answering
machine is connected to the product. The product does
not automatically answer the call. Instead, it waits until
it detects the fax tone.
●
Fax/Tel: The product answers incoming calls
immediately. If it detects the fax tone, it processes the
call as a fax. If it does not detect the fax tone, it
creates an audible ring to alert you to answer the
incoming voice call.
● Manual : You must press the Send Fax
button or
use an extension phone to make the product answer
the incoming call.
ENWW
Control-panel menus
17