Filter
Top Products
ENWW 2-13
For Macintosh
If your computer has a USB port and is using Mac OS 8.6 or later, you
can connect the printer to the computer using a USB cable. If your
computer does not have a USB port, you can connect the printer to the
computer using an LIO module.
Setting the LCD language
By default, the LCD displays messages in English. If necessary, set the
printer to display messages in another supported language. You can
set the LCD language from the Toolbox or from the LCD panel.
To set the LCD language
1 Ensure that the printer is turned off. (Press the POWER button to
turn off the printer.)
2 Hold down the CANCEL button and press the POWER button to
turn on the printer in a language-setting mode.
When the printer turns on, the LCD displays the current language.
3 Press the CANCEL button to scroll through the language list.
4 When you see the language you want to use, press the RESUME
button to confirm the language selection.
After you select a language, the language-setting mode ends, and the
printer resumes its normal functions with the new language in effect.
EulerUG.book Page 13 Monday, July 16, 2001 5:34 PM