Filter
Top Products
3. Insert the wireless receiver into a USB 2.0 port on the computer.
NOTE: Insert the wireless receiver into a USB 2.0 port that is separated from USB 3.0 devices.
Figure 6-9 Installing the wireless receiver
4. Make sure the Power switch on the bottom of the mouse is in the On position.
5. Press and release the Connect button on the bottom of the mouse. The blue activity LED from
the wireless receiver illuminates when the synchronization command has been received and
turns off when synchronization is complete.
6. Press and release the Connect button on the bottom of the keyboard. The blue activity LED from
the wireless receiver illuminates when the synchronization command has been received and
turns off when synchronization is complete.
Figure 6-10 Synchronizing the wireless keyboard and mouse
NOTE: If the procedure does not work, remove and then reinsert the wireless keyboard and mouse
receiver from the back of the computer and then synchronize the keyboard and mouse again. If
synchronization still does not work, remove and replace the batteries.
Synchronizing the optional wireless keyboard or mouse 33