Filter
Top Products
Hardware options installation 62
o To remove slot covers 5 and 6, push down on the latch, rotate the latch down, and then remove the
cover.
Installing a half-length expansion board
1. Power down the server (on page 24).
2. Extend the server from the rack (on page 24).
3. Remove the access panel (on page 25).
4. Remove the full-length expansion board retainer (on page 28) if any full-length expansion boards are
installed.
5. Remove the PCI riser cage (on page 29).
6. Remove the expansion slot cover ("Expansion board options" on page 60, "Removing expansion slot
covers" on page 60).
7. Install the expansion board.
8. Connect any required internal or external cables to the expansion board. See the documentation that
ships with the expansion board.
9. Install the PCI riser cage (on page 29).
10. Install the full-length expansion board retainer (on page 30) if any full-length expansion boards are
installed.
11. Install the access panel (on page 26).
Installing a full-length expansion board
1. Power down the server (on page 24).
2. Extend the server from the rack (on page 24).
3. Remove the access panel (on page 25).
4. Remove the full-length expansion board retainer (on page 28).
5. Remove the PCI riser cage (on page 29).
6. Install the expansion board.