Filter
Top Products
Hard drive
NOTE: The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar
cover.
Description Spare part number
250GB,7200RPM 580680-001
320GB,7200RPM 600827-001
500GB,7200RPM 600828-001
640GB,5400RPM 605631-001
160GB,INTERNAL, 7200RPM 581181-001
128GB, SSD 600829-001
Hard Drive Hardware Kit (includes hard drive bracket and hard drive screws) 611218-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 36).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the three Phillips PM2.0×5.0 captive screws that secure the hard drive cover to
the computer.
38 Chapter 4 Removal and replacement procedures