Filter
Top Products
c. Disconnect the display panel cable (2) from the connector on the back of the display panel.
The display panel cable is available using the spare part number 611216-001.
Reverse the procedure to replace the display cable.
13.
If it is necessary to replace the webcam, which is spared as 611217-001 and includes the cable:
a.
Place the panel enclosure flat on the table with the webcam furthest away from you.
b. Loosen the webcam (1) up by pulling on it to break the adhesive bond and pull up.
c. Disconnect the camera module (2) from the camera cable.
Reverse the procedure to install the webcam module.
14.
If it is necessary to replace the wireless antennas:
a.
Remove the hinge covers from the enclosure by removing the two silver broadhead Phillips
2.0×3.0 screws (1) and the two black broadhead Phillips 2.0×3.0 screws (2).
Component replacement procedures
61