Filter
Top Products
16. Remove the left and right hinge covers (3) by sliding them off of the display hinges. The display
hinges are available using spare part numbers 432964-001 (for use with dual lamp display
assemblies) and 432963-001 (for use with single lamp display assemblies). The display hinge
covers are available using spare part number 432965-001.
17. If it is necessary to replace the wireless antenna transceivers and cables, remove the two Phillips
PM2.0×4.0 screws (1) that secure each transceiver to the display enclosure.
18. Remove the wireless antenna cables from the clips (2) built into the display enclosure.
19. Detach the wireless antenna transceivers (3) from the display enclosure.
20. Remove the wireless antenna cables (4). The wireless antenna transceivers and cables are
available using the following spare part numbers:
●
448313-001 (for use with computer models equipped with an 802.11a/b/g/n WLAN module)
●
448312-001 (for use with computer models equipped with an 802.11a/b/g or 802.11b/g WLAN
module)
21. If it is necessary to replace the microphones and cables, release the retention tabs (1) built into
the display enclosure that secure the microphone cables to the display enclosure.
22. Remove the microphone receivers (2) from the clips in the display enclosure.
Component replacement procedures 73