Filter
Top Products
Display assembly
NOTE: The display assembly spare part kit includes a webcam/microphone module and cable, 2
WLAN antenna transceivers and cables, nameplate, and logo.
Description Spare part number
With bronze finish:
15.6-in, WVA, AntiGlare LED display assemblys 591172-001
15.6-in, WVA, BrightView LED display assembly 602481-001
15.6-in, SVA, BrightView LED display assembly 602480-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 36).
5. Remove the memory module compartment cover (see “Expansion memory module”).
6.
Remove the top cover (see
Top cover on page 39).
Remove the display assembly:
1. Disconnect the following cables:
a. Bluetooth module cable (1)
b. Ambient light sensor module cable (2)
c. Display panel cable (3)
d. Wireless antenna cables (4)
Component replacement procedures
61