Filter
Top Products
13.
Remove the two Phillips PM2.0×3.0 screws 1 that secure the wireless antenna transceivers to the
display enclosure.
a. Remove the two Phillips PM2.0×3.0 screws (1) that secure the wireless antenna transceivers
to the display enclosure.
b. Release the wireless antenna cables from the routing channel (2) built into the right side of
the display enclosure.
c.
Remove the wireless antenna transceivers and cables (3). The wireless antenna transceivers
and cables are available using spare part number 576814-001.
Reverse this procedure to install the display assembly.
68 Chapter 4 Removal and replacement procedures