Filter
Top Products
Card reader
Description Spare part number
Card reader xxxxxx-001
The card reader is secured to the front right corner of the chassis.
1. Prepare the computer for disassembly (
Preparation for disassembly on page 141).
2. Remove the access panel (
Access panel on page 142).
3. Remove the front bezel (
Front bezel on page 143).
4. Remove the optical drive (
Removing the optical drive on page 151).
5. Remove the hard drive (
Hard drive on page 154).
6. Remove the drive cage (
Drive cage on page 164).
7. Disconnect the cable from the system board connector labeled MEDIA.
8. On the outside of the chassis, remove the one Torx screw that secures the card reader to the
chassis.
166 Chapter 7 Removal and replacement procedures: Ultra-slim Desktop (USDT)