Filter
Top Products
44 Chapter 3
Making a Basic Measurement
Presetting the Spectrum Analyzer
Presetting the Spectrum Analyzer
Preset provides a known starting point for making measurements. The analyzer has
three types of preset:
Factory Preset Restores the analyzer to its factory-defined state.
User Preset Restores the analyzer to a user-defined state.
Mode Preset This type of preset restores the currently selected mode to a known
state.
For details, see the User’s/Programmer’s manual.
When
Preset Type is set to Factory, pressing the green Preset key triggers a factory
preset. When
Preset Type is set to User, pressing Preset displays the softkeys Factory
Preset
, User Preset, and Mode Preset (if applicable); you then select the preset you want.
If
Preset Type is set to Mode, but a personality is not installed, pressing Preset triggers a
factory preset.
Creating a User Preset
If you constantly use settings which are not the factory defaults, use the following steps
to create a user-defined preset:
1. Set analyzer parameters as desired.
2. Press
System, Power On/Preset, Save User Preset to set the current parameters as the
user preset state.
3. Press
Preset to select User in the same softkey menu to enable user preset as an
option.
Disabling User Preset
Go to the Power On/Preset menu (press
System, Power On/Preset) and select a Preset Type
of Factory or Mode.