Filter
Top Products
Chapter 5 81
Options and Accessories
Options
Phase Noise
Measurement
Personality
226 Option 226 is an automated phase noise (dBc/Hz)
measurement solution, providing the ability to measure
SSB noise, RMS noise, DANL, as well as the real-time
generation of a phase noise vs. log offset frequency, and
phase noise vs. time. High Stability Frequency
Reference (Option 1D5) is recommended. Narrow
resolution bandwidth (Option 1DR) is highly
recommended. Without Option 1DR, the minimum offset
frequency will be 10 kHz.
Pre-amplifier 1DS The pre-amplifier improves the analyzer’s sensitivity
(lowers the noise floor) by approximately 16 dB.
Rack Mount Kit with
Handles
1CP Option 1CP provides the parts necessary to mount the
analyzer in a standard 19 inch (482.6 mm) equipment
rack. It includes front handles and rack slides for added
convenience. Rack mount height is 8.75 in (222.3 mm).
RF and Digital
Communications
Hardware
B74 Option B74 includes the RF Communications Hardware
(Option B7E), Digital Signal Processing and Fast ADC
(Option B7D), Time-Gated Spectrum Analysis (Option
1D6), Memory Extension (Option B72), High Stability
Frequency Reference (Option 1D5), Preamplifier (Option
1DS), and Narrow Resolution Bandwidth (Option 1DR)
assemblies. These options are required for optimum
performance of the cdmaOne (Option BAC) or GSM
measurement personality (Option BAH).
RF Communications
Hardware
B7E Option B7E provides the communications hardware
required for many digital communication
measurements. Option B7E must be ordered with
Option B7D (digital signal processing and fast ADC) and
Option 1D5 (high stability frequency reference). This
provides burst carrier trigger capability.
RS-232 and Parallel
Interface
1AX Option 1AX allows you to control your analyzer from a
computer that uses an RS-232 interface. It includes a 2.5
meter 9-pin (f) to 9-pin (f) connector RS-232 cable
(Agilent 5182-4794), a parallel interface connector for
printers, a CD-ROM containing IntuiLink Toolbar
software, and the programmer’s guide for your analyzer.
This program allows you to download spectrum analyzer
display or data files to a personal computer using
Microsoft Word or Microsoft Excel. IntuiLink Toolbar
installation instructions are included with the CD-ROM.
Option 1AX allows the analyzer to copy its display to a
printer.
Name
Option
Number
Description