Filter
Top Products
Computer feet
Description Spare part number
Rubber Feet Kit (includes 4 base enclosure rubber feet) 431431-001
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations
shown below.
Memory module
Description Spare part number
1024-MB (PC2-4200, 533-MHz, 1-DIMM) 443489-001
1024-MB (PC2-5300, 667-MHz, 1-DIMM) 450610-001**
512-MB (PC2-5300, 667-MHz, 1-DIMM) 428879-001
256-MB (PC2-5300, 667-MHz, 1-DIMM) 445975-001
** For use with F550–F579, G6000 models
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Battery on page 29).
Remove the memory module:
1.
Position the computer with the front toward you.
2. Loosen the three Phillips PM2.0×5.0 screws (1) that secure the memory module compartment cover
to the computer.
32 Chapter 4 Removal and replacement procedures