Filter
Top Products
4.
Remove the battery (see
Battery on page 29).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 30)
b.
Memory module compartment cover (see
Memory module on page 32)
c.
Optical drive (see
Optical drive on page 36)
d.
Switch cover (see
Switch cover on page 38)
e.
Keyboard (see
Keyboard on page 40)
f.
Display assembly (see
Display assembly on page 44)
g.
Top cover (see
Top cover on page 49)
Remove the audio board:
1. Remove the two Phillips PM2.5×5.0 screws (1) that secure the audio board to the computer.
2. Release the audio board (2) by sliding it away from you until the connectors on the front of the board
disengage from the openings in the base enclosure.
3. Remove the audio board (3).
4. Disconnect the audio board cable (4) from the audio board.
Reverse this procedure to install the audio board.
52 Chapter 4 Removal and replacement procedures