Filter
Top Products
15. Remove the display hinges (2).
NOTE: The display hinges are available using spare part number 433288-001
16.
If it is necessary to remove the wireless transceivers and cables, remove the Phillips PM2.0×4.0
screw (1) that secures each transceiver to the display enclosure.
17. Remove the wireless antenna cables from the clips (2) built into the display enclosure.
18. Detach the wireless antenna transceivers (3) from the display enclosure.
19. Remove the wireless antenna cables (4) from the display enclosure.
NOTE: The wireless antennae are included with the display enclosure and are also available using
spare part number 431398-001.
Reverse this procedure to reassemble and install the display assembly.
48 Chapter 4 Removal and replacement procedures