Filter
Top Products
Care and maintenance 64
LCD error messages
Junk Fax Empty You attempted to delete a junk fax number when there is no
junk fax number.
Junk Fax Full The machine can hold only 20 junk fax numbers.
Load Document You must load a document before preceding.
Memory Full Memory has become full while receiving a fax. It will not
answer the telephone until memory has been cleared. Print any
faxes stored in memory and, if necessary, clear scheduled jobs
See Reprinting faxes on page 52 and see Clearing memory on
page 53.
Memory Full
Press Start/Enter
to continue
Memory has become full while scanning a document. Press
Start/Enter to send or copy the scanned pages only. To cancel
the job press Cancel and try again when memory becomes
available, or split the new document into smaller parts. See
Clearing memory on page 53.
Memory Received
Ink Low. Install
new ink cartridge
The machine has data stored in memory. Replace the print
cartridge with new one in order to print the faxes.
Memory Received
Load paper and
press Start/Enter
Load paper and press Start/Enter. There might be a jam. Clear
the jam as described in Paper jams during printing on
page 58.
Memory Received
Install ink
cartridge
There is no print cartridge in the machine. Install a print
cartridge.
New Fax Received The machine is low on ink and has received faxes into memory.
You must replace the print cartridge (see Replace the print
cartridge on page 56.) and reprint the faxes from memory (see
Reprinting faxes on page 52.).
No answer from
remote fax
The other machine has not answered after all redial attempts to
send a fax.
No CID Number The machine could not detect the CID (Caller ID) number.
No Dial Number There is no number in the redial memory.
Not Found The number you are searching for does not exist in memory.
Number already
registered
The number you are trying to enter already exists in the phone
book or junk fax list.
Number Not Assigned There is no number assigned to this One-Touch or two-digit
Speed number.
Display Status/Solution