Filter
Top Products
Resetting the printer to the factory default settings can require you to reinstall the
printer software. Additionally, you might also have to reconfigure the printer security
settings.
The printer default settings are:
Option
Default setting
Communication mode Ad hoc
Network name (SSID) hpsetup
Encryption None
IP address Automatic
Wireless radio Off
EWS administrator password [blank]
Follow these steps to reset the printer to the factory default settings:
1. Verify that the printer is powered on.
2. Press and hold down the Report Page button.
3. While holding down the Report Page button, press the Cancel button three times.
4. Release the Report Page button.
Network Guide
11