Filter
Top Products
11HP StorageWorks ESL9000 Series Tape Library Memory Module Upgrade Guide
1
Installing the Memory Module
This document provides instructions for upgrading the memory module on the
library robotics controller. The memory module upgrade process consists of the
following steps:
■ Preparing the Library for the Upgrade
■ Removing the Robotics Controller
■ Removing and Replacing the Memory Module
■ Completing the Procedure
To complete this upgrade you will need:
■ Memory module
■ Library firmware (on memory module)
■ Tools
— 5/32 inch Allen wrench
— #2 Phillips screwdriver
— #1 Phillips screwdriver
— Electrostatic Discharge (ESD) wrist strap connected by a ground cord to a
grounded workstation or chassis