Filter
Top Products
Installing the Memory Module
14 HP StorageWorks ESL9000 Series Tape Library Memory Module Upgrade Guide
Removing and Replacing the Memory Module
To remove and replace the memory module:
1. Place the robotics controller on an anti-static mat and use ESD precautions.
2. Remove the memory module from the robotics controller as shown in
Figure 2.
Figure 2: Removing the memory module
3. Install the new memory module in the robotics controller (see Figure 2).
4. Re-install the robotics controller by reversing the steps in “Removing the
Robotics Controller” on page 13.
5. Reinstall the electronics bay cover.