Filter
Top Products
Installing the Memory Module
17HP StorageWorks ESL9000 Series Tape Library Memory Module Upgrade Guide
The main menu for libdiag should be displayed.
Figure 3: Libdiag main menu
Changing the Library Mode
To set the library for HP mode:
1. Initialize Non-Volatile RAM:
a. Click Config.
b. Select Initialization, then select Init Non-Vol RAM (wait for response).
2. Set the model number, bins, and drives as shown in step 3 through step 6. See
Table 2 on page 20 to find the correct model number and drive type for your
library.
3. Click Config, then select Configure System. A screen appears that lists
model numbers on the left and the current model number on the right.
4. Click the current model number and backspace to delete it. Type in the correct
model number and press Enter.
5. At the next screen, select the number of bins and drives, and the SCSI ID of
library.