Filter
Top Products
Introduction and Related Information
Hardware Configurations
Chapter 120
Hardware Configurations
rx9610 Server
The rx9610 server can contain up to 4 cells. Each cell includes, among
other things, a memory card (16 dimm slots), four Itanium processors,
and a connector for an additional memory card (16 additional dimm
slots). The configurations for the rx9610 are:
Server rx9610 - 16-way IPF-based server
Processor 733MHz/2MB
800MHz/4MB
Memory 128GB max memory using 16 SDRAM DIMM sockets
per memory expander board per cell
Drives DVD drive (IDE)
Floppy drive LS-120 (IDE) slim line
Hard Disk Drives (HDD) 2 hot swap 1" 18GB each,
total 36GB
PCI I/O up to 64 66MHz slots or 128 33MHz slots
Supported Add-On Peripherals
A5272A - Sure Store E Disk System S10
A5236A(z) - Sure Store E Disk System FC10
A5277A - Sure Store E Disk Array FC60
A3311A - High Availability Storage System
A5599A - DLT8000 Tape Drive
Supported Add-On Cards
A5150A -Dual Port Ultra2 SCSI
A5159A -Dual Port FWD SCSI-2
A4926A - PCI 1000BaseSX Gigabit Ethernet Fiber,
single port
A4929A - PCI 1000BaseT
A6792A - PCI 100BaseT
A5158A - Single Port Fibre Channel (Tachlite)
rx4610 Server
The Itanium processor server configurations for the rx4610 are: