HP (Hewlett-Packard) I2000 All in One Printer User Manual


 
Introduction and Related Information
Mass Storage Drivers
Chapter 1 23
Mass Storage Drivers
External mass storage is not supported on the i2000 hp workstations.
New SCSI Drivers
For the rx9610 and rx4610 servers, two new SCSI HBA drivers, qlisp
and c8xx, are released in HP-UX 11i Version 1.5 (B.11.20). The c8xx
driver runs on all IPF systems and replaces the c720 HBA driver on PA
systems. The qlisp HBA driver is a new driver to support the 12160
Qlogic SCSI controller.
The c8xx HBA driver supports both the A5150A, Dual Channel Ultra2
SCSI, and the A5159A, Dual Channel FWD SCSI-2, add-in PCI cards.
The qlisp HBA driver supports the core Qlogic SCSI controller.
There is no early dump support in HP-UX 11i Version 1.5 (B.11.20).
Unlike PA systems, on IPF based systems, it is not possible to get a crash
dump before the system is booted. For more information, see System
Crash Dump Changes in Chapter 3 of the HP-UX 11i Version 1.5 Release
Notes, “HP-UX Features.”
Tachlite Driver
For the rx9610 and rx4610 servers, this release includes td, the Fibre
Channel PCI Tachyon TL driver. This version of the driver supports
Fibre Channel Arbitrated Loop (FC-AL) only. Fabric is not supported in
this release.
The IPF platforms supported by this driver are:
hp server rx9610
hp server rx4610
For a complete list of supported platforms and devices as well as other
up-to-date information, see the Fibre Channel web site at
http://techsolutions.hp.com.