Filter
Top Products
8Setup
• If a test page does not print, refer to the Troubleshooting
chapter of this User’s Guide.
• If the IP address on the test page is 0.0.0.0, the HP JetDirect
70X has not initialized. Wait one minute and press the Test
button again.
5. Set Up Your PC to Print to Your HP JetDirect
70X-Connected Printer
Note: If you are using Internet sharing, perform thesetup
first on the PC which provides Internet sharing.
The installation method varies with the printer you are installing.
Determine which option is appropriate for your printer and
environment; then follow the instructions below.
Option A: For HP DeskJet 970, 950, 930, 895C, 880C, 810, 2000
Professional Series, LaserJet 5L, 6P, 2100, or 4000 Series
printers.
Option B: For HP OfficeJet G, HP LaserJet 3150, or LaserJet
1100A All-in-Ones.
Option C: For printers not listed above that were previously
installed and working on your PC.
Option D: For printers not listed above that have not been
installed on your PC.
Note: It is necessary to repeat the installation option for
each PC in your network from which you want to
print.
Option A: For HP DeskJet 970, 950, 930, 895C, 880C, 810, 2000
Professional Series, LaserJet 5L, 6P, 2100, or 4000 Series
printers.
• If you are running Windows 95 or 98, insert the HP JetDirect
70X Setup CD and run the Setup Wizard.
• If you are running Windows NT
®
4.0 and your printer was
previously installed, insert the HP JetDirect 70X Setup CD
and run the Setup Wizard. If your printer was not previously
installed, you must first install the printer (use Option D
below).