Filter
Top Products
Setup 9
Option B: For HP OfficeJet G, HP LaserJet 3150, or HP
LaserJet 1100A All-in-Ones.
• You must use the Setup CD that shipped with your All-in-One.
During the installation, choose the network installation
option. This option will guide you through the setup.
Option C: For printers not listed above that were previously
installed and working on your PC.
• Insert the HP JetDirect 70X Setup CD and run the Setup
Wizard.
Option D: For printers not listed above that have not been
installed on your PC.
•Part1. Install the printer. Use the printer Setup CD that
came with your printer. During the setup you may be
prompted to choose a port. If this happens, choose LPT1. If
you get a message saying that no printer is attached to LPT1,
simply continue with the printer installation (you may have
to click Skip).
•Part2. Insert the HP JetDirect 70X Setup CD and run the
Setup Wizard.
Note: For supported All-in-Ones not listed above, in order
to use the HP JetDirect WebScan feature, you must
choose the TCIP/IP printing protocol. (You will be
prompted for this selection during the Setup
Wizard.) See the Network Scanning section in
Chapter3formoreinformation.