Filter
Top Products
77
4 HP BIOS
Symbios Logic SCSI Configuration Utility
Symbios Logic SCSI Configuration Utility
The Symbios Logic SCSI Configuration Utility lets you view and change the
default configuration for the host adapter and all SCSI devices connected to
it, or for individual SCSI devices. If, while using this utility, you accidentally
disable all the controllers, pressing during the power-on self test (after
the memory test) lets you recover and configure settings.
Default Settings You Can Change
The following two tables show the configuration settings that can be
changed. The first table shows the global settings which impact the host
adapter and all SCSI devices connected to it. The second table shows the
device settings which apply to individual devices.
Settings for the Host Adapter and All Devices Default Settings
SCAM Support On
Parity Checking Enabled
Host Adapter SCSI ID 7
Scan Order Low to High (0-Max)
Settings for Individual SCSI Devices Default Settings
Synchronous Transfer Rate (MB/sec) 40
Data Width 16
Disconnect On
Read Write I/O Timeout (secs) 10
Scan for Devices at Boot Time Yes
Scan for SCSI LUNs Yes
Queue Tags Enabled