Filter
Top Products
8 Getting Started
Connecting the power source
Plug the power cord into the AC adapter (brick), and the power adapter cord into the back of the
computer. Route the power cord through the notch in the computer stand, and then plug the power cord
into an AC power source through a surge protector/uninterruptible power supply (UPS).
Cable Management
The HP TouchSmart PC includes a cable-management feature that is located behind the back connector
cover. To use the cable routing clip feature:
1 To remove the connector cover on the back of the computer, insert your finger under the gap on the
bottom-left side of the cover, and pull gently.