Filter
Top Products
4.
If mounting the monitor using another manufacturer’s solution, use the screws (1) previously removed
from the monitor base to mount the display (2) to a swing arm or other mounting fixture. Consult the
documentation included with the mounting fixture for additional instructions.
CAUTION: This monitor supports the VESA industry-standard 100mm mounting holes. To
attach a third-party mounting solution to the monitor, four 4mm, 0.7 pitch, and 10mm long
screws are required (not provided with the monitor). Longer screws should not be used
because they may damage the monitor. It is important to verify that the manufacturer’s
mounting solution is compliant with the VESA standard and is rated to support the weight of
the monitor display panel. For best performance, it is important to use the power and video
cables provided with the monitor.
Figure 3-15 Mounting the Monitor Using a Third-Party Solution
14 Chapter 3 Setting Up the Monitor E
NWW