Filter
Top Products
Adjusting the Monitor Settings
The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display
Assistant utility.
Using the On-Screen Display Menu
Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To
access the OSD, do the following:
1.
If the monitor
is not already on, press the Power button to turn on the monitor.
2.
To
access the OSD Menu, press the Menu button on the monitor’s front panel.
3.
To navigate through the OSD Menu, press the + (Plus) button on the monitor’s front panel to scroll
up, or the − (Minus) butto
n to scroll in reverse.
4.
To select an item from the OSD Menu, use the + or – buttons to scroll to and highlight your selection,
then press the Menu button to select that function.
5.
Adjust the item using
the + or – buttons on the front panel to adjust the scale.
6. After adjusting the function, select Save and Return, or Cancel if you don’t want to save the
setting, then select Exit from the Main Menu.
NOTE: If the buttons remain untouched for 10 seconds while displaying a menu, new adjustments
will be discarded and the settings will revert to previous settings and exit the menu.
OSD Menu Selections
The following tables list the On-Screen Display (OSD) menu selections and their functional descriptions.
After changing an OSD menu item, and if the menu screen has these options, you may choose to:
● Cancel—to return to the previous menu level.
●
Save and Return—to save all changes and return to the OSD Main Menu screen. This Save and
Return option is only active if you change a menu item.
●
Reset—to change back to the previous setting.
There are two On-Screen Display menus, one for basic adjustments, and one for advanced adjustments.
To access the Basic Main Menu, press the Menu button on the monitor's front panel. If the Advanced Main
Menu is displayed, select Management > Basic Menu to switch from the Advanced Main Menu to
the Basic Main Menu.
20 Chapter 4 Operating the Monitor E
NWW