Filter
Top Products
Hardware options installation 47
o
Next: D, E, and F
o Last: G, H, and I
• UDIMM
o First: A, B, and C
o Last: D, E, and F
o Do not populate slots G, H, and I.
After installing the DIMMs, use RBSU to configure the system for online spare memory support
("Configuring online spare memory" on page 87).
Multi-processor Online Spare population order
For Online Spare mode configurations with a multiple processors, populate the DIMM slots for each
processor in the following order:
• RDIMM
o First: A, B, and C
o Next: D, E, and F
o Last: G, H, and I
• UDIMM
o First: A, B, and C
o Last: D, E, and F
o Do not populate slots G, H, and I.
After installing the DIMMs, use RBSU to configure the system for online spare memory support
("Configuring online spare memory" on page 87).
Installing DIMMs
CAUTION: To avoid damage to the hard drives, memory, and other system components, the
air baffle, drive blanks, and access panel must be installed when the server is powered up.
1. Power down the server (on page 20).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Open or remove the tower bezel" on page 20).
o Extend the server from the rack (on page 21).
3. Remove the access panel (on page 21).
4. Remove the air baffle (on page 22).
5. Open the DIMM slot latches.