Filter
Top Products
Removal and replacement procedures 42
4.
Remove the processor air baffle.
To replace the component, reverse the removal procedure.
Center wall
To remove the component:
1. Power down the server (on page 29).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 29, "Remove
the server from the rack" on page 29).
3. Remove the access panel. ("Access panel" on page 31)
4. Remove the processor air baffle ("Processor air baffle" on page 41).
5. Remove the full-length expansion boards ("Expansion board" on page 40).
6. Lift the center wall retaining latch.
7. Remove the center wall.