![](http://pdfasset.owneriq.net/5/1a/51a72c66-3c04-4791-a5a0-4b585d3cdbc1/51a72c66-3c04-4791-a5a0-4b585d3cdbc1-bg69.png)
Removal and Replacement Procedures
Maintenance and Service Guide 5–9
6. Loosen the Phillips PM2.5×13.0 spring-loaded hard drive
retention screw 1.
7. Grasp the mylar tab 2 on the hard drive and slide the hard
drive 3 to the left to disconnect it from the system board.
8. Remove the hard drive 4 from the hard drive bay.
Removing the Hard Drive