![](http://pdfasset.owneriq.net/5/1a/51a72c66-3c04-4791-a5a0-4b585d3cdbc1/51a72c66-3c04-4791-a5a0-4b585d3cdbc1-bga6.png)
5–70 Maintenance and Service Guide
Removal and Replacement Procedures
2. Turn the computer upside down with the front toward you.
3. Remove the two Phillips PM2.0×6.0 screws on each side of
the hard drive connector that secure the system board to the
base enclosure.
Removing the System Board Screws, Part 1