Filter
Top Products
SENTRY User’s Guide Section 4 - 11
Fitzgerald & Long
4.5 UPDATE PROTECTED COMMANDS
UPDATE.VOC Command Update 09/18/00
Account Name : _____________________________________________________
Enter the pathname to an account or ‘ALL’ for all accounts.
Figure 46 - This is an example of the screen used to re-load the VOC protection for one or more
accounts.
SENTRY command protection uses the database file SENTRY.COMMANDS to store data about
protected commands. The protected commands actually reside in the VOC file of the account where they
are used. It is possible through the use of the editor or upgrading to a new release that the protected VOC
records could be overwritten. This program will re-load the VOC protection from the
SENTRY.COMMAND file. To re-install the command protection into the VOC of an account enter the
account name at this prompt. You must use the fully qualified UNIX pathname here. To re-load all
protected accounts enter ALL. SENTRY will report the number of items to be updated in each account.
We suggest you use the Commands Report to review the contents of the SENTRY.COMMANDS file
before proceeding with this program.
Once you have entered the pathname to the account SENTRY will validate the pathname and ask if you are
ready to continue with the updates. To continue with the updates enter “OK”. Enter <ESC> to abort this
program.