Filter
Top Products
user guide
maintain your hp psc
31
maintain your hp psc
Note: It is normal to see ink buildup in the print cartridge slots.
4 Remove the new print cartridge from its packaging and, being careful to
touch only the bright pink plastic tab, gently remove the plastic tape to
uncover the ink nozzles.
Caution! Do not touch the copper-colored contacts or ink nozzles.
After you have removed the plastic tape, install the print cartridge
immediately to prevent the ink from drying in the nozzles.
5 Hold the black print cartridge with the HP label on top. Slide the print
cartridge at a slight angle into the right side of the print carriage.
Press firmly until the print cartridge snaps into place.
Caution! Do not attempt to push the cartridge straight into the slot.
It must slide in at a slight angle.
6 Hold the tri-color print cartridge with the HP label on top. Slide the print
cartridge at a slight angle into the left side of the print carriage.
Press firmly until the print cartridge snaps into place.
Caution! Do not attempt to push the cartridge straight into the slot.
It must slide in at a slight angle.
Note: You must install both print cartridges in order for your HP psc to work.