Filter
Top Products
Commands46
Defined identifiers
The following identifiers will be returned in the given order. What Port Name is returned depends
on which port the Inquiry is sent to.
Logical Unit Identifier
Port Name (FC only)
PIV 1 The Protocol Identifier field is valid. This is set for an Association value of 1.
Association 0 The Identifier field is associated with the addressed logical unit.
1 The Identifier field is associated with the port that received the request.
2 The Identifier field is associated with the SCSI target device that contains the addressed
logical unit.
3 Reserved
Identifier Type 1 Vendor ID followed by the product identification field from the standard inquiry data and
the serial number field from the Serial Number Inquiry page.
3 All devices with a Fibre Channel interface support an Identifier type 3. In this case the
Identification Descriptor is the Fibre Channel 64-bit Name Identifier.
7 6 5 4 3 2 1 0
0 Protocol Identifier (0) Code Set (1)
1 PIV (0) Rsvd (0) Association (0) Identifier Type (3)
2 Reserved (0)
3 Identifier Length (8)
4 (MSB)
SSC Device Logical Unit Name (IEEE Registered Name)
11 (LSB)
7 6 5 4 3 2 1 0
0 Protocol Identifier (0) Code Set (1)
1 PIV (1) Rsvd (0) Association (1) Identifier Type (3)
2 Reserved (0)
3 Identifier Length (8)
4 (MSB)
Port Name
(IEEE Registered Name)
11 (LSB)