Filter
Top Products
LOG SENSE 4Dh
Commands
59
Supported Log Pages page
This SCSI log may be recovered using a Log Sense command with the PC field set to anything and
the Page Code field set to 00h. The page lists the page codes of other logs supported by the drive.
It can neither be reset nor written.
The page has the following format:
Parameter Length The length of Parameter Bytes in bytes.
Parameter Bytes The actual parameter data.
7 6 5 4 3 2 1 0
0 Reserved (0) Page Code (00h)
1 Reserved (0)
2 (MSB)
Page Length (0Dh)
3 (LSB)
4 Supported Pages (00h)
5 Write Error Counters (02h)
6 Read Error Counters (03h)
7 Sequential Access Device Log (0Ch)
8 Temperature (0Dh)
9 DTD Status (11h)
10 Protocol Specific (18h)
11 TapeAlert Log (2Eh)
12 Tape Usage Log (30h)
13 Tape Capacity Log (31h)
14 Data Compression Log (32h)
15 Performance Log (34h)
16 Device Status Log (3Eh)