Filter
Top Products
5
MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 55899 Rev 18210
www.msscllc.com
5. Controller and Print Head Grounding Cable.
To help prevent the buildup of static electricity on the controller and/or remote print head, the included grounding
wire(s) should be attached to a proper earth ground, bare metal. This wire gives the static charge a direct path to
ground preventing discharge through the controller’s or printhead’s sensitive electrical components.
For the QM2-111, perform steps 1 and 2. For the QM2-101, perform step 2 only.
5b. Place large ring terminal of
supplied ground wire under
controller mounting screw as
shown below and terminate the
other end to earth ground.
5a. Place large ring terminal of
supplied ground wire under print
head mounting screw as shown
below and terminate the other end to
earth ground.