Filter
Top Products
9. Lift the Smart Card reader access cover to the upright position (3).
10. Loosen the Phillips M2.5x10.5 captive screw (1) that secures the hard drive to the computer.
11. Grasp the tab on the hard drive and slide the hard drive (2) to the right.
12. Lift the left side of the hard drive (3) and remove the hard drive (4) at an angle from the hard
drive bay.
13. If it is necessary to replace the hard drive bracket, follow these steps:
a. Remove the four Phillips M3.0x3.0 screws (1) that secure the hard drive bracket to the hard
drive.
Component replacement procedures 55