Filter
Top Products
Figure 6-6 Closing the Top Cover on a Rack-Mounted Server
3. Slide the server into the rack enclosure and reconnect the power and external cables.
Removing and Replacing the Front Bezel on a Rack-Mounted Server
You must remove the front bezel from the chassis to gain access to the power supplies and optical
drive.
Removing the Front Bezel
To remove the front bezel, follow these steps:
1. Press in on the retaining clips located on the right-side of the front panel.
Figure 6-7 Front Bezel Retaining Clip
2. Rotate the front panel outward and lift it off the server chassis.
Replacing the Front Bezel
To replace the front bezel, follow these steps:
1. Insert the bezel latches into the matching slots on the server chassis.
Removing and Replacing Server Covers and Bezel 129