Filter
Top Products
*
*re /rte_a/rpl_a900_rev4.rel
*re /rte_a/xmb.rel,mb02 For NS/1000 with A900 pre rev.4 firmware only
*re /rte_a/xmb.rel,mb12 For either NS/1000 or %envrn with
* A900 pre rev.4 firmware only
*re /rte_a/xmb.rel,mb01 For %envrn with A900 pre rev.4 firmware only
*re /rte_a/xmb.rel,mb10 For %envrn with A900 pre rev.4 firmware only
*re /rte_a/xmb.rel,mb21 For %envrn with A900 pre rev.4 firmware only
*
*
*
* #################################################################
* # #
* # If you are using an A600 (not an A600+) WITHOUT CDS, then #
* # the following paragraph applies. If you are using any #
* # other type of A–Series processor, (A400 with or without #
* # CDS, A600+, A700 or A900) then the following paragraph #
* # does NOT apply. #
* # #
* # The two routines .DMP and .DDI must be relocated here #
* # because they are required by code that is in the O.S. #
* # partitions. You cannot do library searches for code in #
* # O.S. partitions. This is required ONLY when using an #
* # A600 (using %RPL60). If you are using any other RPL, #
* # these modules will cause duplicate entry point errors #
* # if included in the generation. #
* # #
* #################################################################
*
*!RPL60_!re /rte_a/$math,.dmp Required for A600 (not A600+) (RPL60)
*!RPL60_!re /rte_a/$math,.ddi Required for A600 (not A600+) (RPL60)
*
* SYSTEM MODULES
*
* =======================
* System Relocation Phase
* =======================
le,off, Do not list the module entry points
er,, Echo errors to the terminal
re %vctr:92570,, Entry points
tg 700 Number of tags required
re %mapos:92077,, Partitioned OS tag routines
re %rpl60:92077,, No CDS no double precision floating point
re %exec:92077,, EXEC request processing
re %rtioa:92077,, Real–Time I/O control
re %maps:92570,, Dynamic mapping system routines
re %progs:92570,, Program state processing
re %util:92570,, System variables and utilities
re %sam:92077,, System available memory
re %sched:92570,, Programmatic program scheduling
re %strng:92077,, Runstring passing
re %erlog:92570,, Error Logging
re %opmsg:92077,, Operating system messages
re %sycom:92570,, Operator commands
re %iomod:92570,, I/O module
re %id*43:92077,, Power fail driver