Filter
Top Products
*
* Source: 92077–17326 REV.6200 <950406.1028>
*
* Primary.ans– RTE–A Primary System Generation Answer File to make
* primary.sys(#92077–16954), primary.snp (#92077–16955) and primary.lst
* (#92077–17278).
*
* ***********************************************************************
* * *
* * This half of the primary answer file is used only for Primary *
* * System generation. It is NOT to be used with a user system. *
* * To use this answer file as a sample for generating another *
* * system, delete the first half of this file, and continue with *
* * the instructions on the second half. *
* * *
* ***********************************************************************
*
* This answer file is to be used in a PRIMARY memory–based system. There
* is nothing generated into LU 1. It is required that the startup program
* be LUCFG.RUN, which maps the I/O card which has VCP enabled to the correct
* select code, and the correct interface driver to LU 1. This generation
* requires:
* LU 1: ID100 at select code 20B (double–mapped if VCP port)
* LU 110: ID400 at select code 77B (double–mapped if VCP port)
* LU 120: ID800 at select code 30B (double–mapped if VCP port)
* LU 130: IDM00 at select code 23B (double–mapped if VCP port)
*
* Note that if mapping occurs, do not use the previous LU. (If 12100A is
* the VCP port, LU 110 should not be used, since there are now two LUs
* pointing to the same hardware.)
*
*$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$*