HP (Hewlett-Packard) sb21 Projector User Manual


 
40
Reference Safety Information
Laser Safety
The remote controller used with the digital projector is certified as a Class 1 laser device according
to the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard
and International Standards IEC 825 / IEC 825-1 (EN 60825 / EN 60825-1). This device is not
considered harmful, but the following precautions are recommended:
Ensure proper use by reading and following the instructions carefully.
If the unit requires service, contact an authorized hp service center – See page 37 for details.
Do not attempt to make any adjustment to the unit.
Avoid direct exposure to the laser beam – do not open the unit.
LED Safety
The infrared port located on the right side of the digital projector is classified as a Class 1 LED
(light-emitting diode) device according to International Standard IEC 825-1 (En 60825-1). This
device is not considered harmful, but the following precautions are recommended:
If the unit requires service, contact an authorized hp service center – See page 37 for details.
Do not attempt to make any adjustment to the unit.
Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is invisible light
and cannot be seen.
Do not attempt to view the infrared LED beam with any type of optical device.
regulatory
information