Filter
Top Products
• Access level—Operator
• Scope—Complex
This command configures the complex identification information. The complex identification
information includes the following:
• Model number
• Model string
• Complex serial number
• Complex system name
• Original product number
• Current product number
• Enterprise ID and diagnostic license
This command is similar to the SSCONFIG command in ODE.
The command is protected by an authentication mechanism. The MP generates a lock word, and
you must supply an authentication key that is dependent on the lock word. A one minute fixed
timeout protects against this command being entered inadvertently. This command has no effect
if the timeout pops or the wrong authentication key is entered.
This command is inoperable until the MP has determined the golden complex profile.
NOTE: When the system powers on for the first time, you must run the CC command before
you can run the ID command.
Example B-12 ID Command
IO Command
IO - Display Connectivity Between Cells and I/O
• Access level—Single Partition User
• Scope—Complex
This command displays a mapping of the connectivity between cells and I/O.
158 Management Processor Commands