HP (Hewlett-Packard) sx2000 Computer Hardware User Manual


 
Figure 3-9 Removing the Mounting Brackets
WARNING! Do not remove the bolts on the mounting brackets that attach to the pallet.
These bolts prevent the cabinet from rolling off the back of the pallet.
3. On the other side of the pallet, remove only the bolt on each mounting bracket that is attached
to the cabinet.
4. Insert the ramps into the slots on the pallet.
CAUTION: Make sure the ramps are parallel and aligned (Figure 3-10).
The casters on the cabinet must roll unobstructed onto the ramp.
Unpacking and Inspecting the System 69