HP (Hewlett-Packard) U522 Network Card User Manual


 
Software Requirements
1-8
U522 Ethernet PCI Card Installation Guide
(MAN0063)
Software Requirements
For operating systems prior to HP-UX version 11.00.61, the U522 card may require that
software patches be installed on the operating system. See the
DNCP Patches for
U522, U405, U406, D843, and D844
(R300066) document for the HP-UX operating
systems and software patches needed to support the U522 PCI card on the DNCP
platform.
Also, the required Ethernet communications software must be installed before you can
use the U522 card. For information about installing and configuring the
communications software to be used with the U522 card, refer to the following:
HP-UX Operating System: LAN Configuration Guide
(MAN0005)
HP-UX Operating System: Redundant Network Interface
(MAN0006)
CAUTION
Do not use the RNI to pair two cards in the same card
cage. If you pair two cards in the same card cage, loss of
power to that card cage (including opening the card cage
door) will terminate the network link.
CAUTION
Do not use the RNI to pair two LAN ports on a single U522
PCI card.