Filter
Top Products
Chapter 4
Peripherals and Accessories
4-126 HP e3000 Business Servers Configuration Guide – Effective 1/04
Information Subject to Change
Figure 4.7.1.21 SAN Consolidation
HP-UX
Server
HP-UX
Server
MPE
Server
MPE
Server
Switch
Switch
•
Requires LUN Security
•
Single or Dual HBA
•
Controllers setup with appropriate personalities
(not supported on VA7100)
•
Requires Failover/iX (MPE Not supported on VA7100)
•
Requires Management Station
•
If SCSI-FC is required then use A5814A option 003 for
VA7XXX array
Note:
•
If routers are used then use Single Initiator Zoning on the
switches
VA71x0
Array
Controller 1
Controller 2
VA71x0
Array
Controller 1
Controller 2
Figure 4.7.1.22 Campus Cluster (Typical)
1 2
Server
Node 1
Additional
Nodes
Additional
Arrays
Node 2
Hub
or
Switch 3
Hub
or
Switch 4
Additional
Nodes
Additional
Arrays
Hub
or
Switch 1
Hub
or
Switch 2
1 2
Networks
Building 1
Buildin
g
2
Virtual Array 1
(7100 with
0-6 DS2400
Enclosures)
Virtual Array 1
(7100 with
0-6 DS2400
Enclosures)
Server
Cable/Connection Legend
SCSI HVD
Fibre channel short-wave optical only
LAN connection
Notes:
• MPE/iX 7.0 Express 1 requires management station and HP SCSI-FC router (A5814A option 003) for Fibre Channel connectivity. Native Fibre Channel
supported in MPE/iX 7.5 or greater.
• Hubs and switches cannot be mixed in this configuration. They must be all hubs or all switches.
• Metro Cluster and Continental Cluster are not supported.
• For more details on Campus Cluster, please refer to Campus clusters http://haweb.cup.hp.com/LP/Documents/B7660-90006.pdf