Filter
Top Products
Thin State Deploy
To perform a ThinState deployment:
1. Set the boot order in the F10 System Bios to USB boot (if necessary).
2. Attach the USB flash drive to the thin client unit you wish to deploy the captured image to, and then
power on the unit.
3. Follow the on-screen instructions.
After you remove the USB flash drive and cycle power to the system, the image unbundles. Do not
interrupt or cycle power to the unit during this process.
You may use the captured image (flash.dd) found in the USB flash drive in combination with Altiris
Deployment Solution to remotely image multiple thin client units.
NOTE: You must use flash.dd in conjunction with HP’s ThinState Deploy utility (e.g. ibr.exe). Flash.dd
is not compatible with Altiris’ rdeploy.exe or rdeployt.exe utilities. Please consult the HP Compaq Thin
Client Imaging Tool at:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00485307/
c00485307.pdf
For more information about Altiris, see http://www.altiris.com/.
Internet Options
The Internet Settings dialog box allows you to configure Internet browser settings on the terminal.
The Internet Settings dialog box includes the following tabs:
●
General: Allows you to enter start and search pages, identify the Web browser type to determine
how Web pages are displayed, set the cache size, and clear cache and history.
●
Connection: Allows you to select LAN or autodial connections and to configure proxy server
settings.
●
Security: Allows you to specify Web sites that are trusted, restricted, and so on. Also allows you
configure ActiveX, scripting, and other advanced-type internet options.
●
Privacy: Allows you to configure how the browser handles cookies.
Internet Options 35