Filter
Top Products
6. Select Check for updates at startup to cause the unit to check the entered FTP site for software
updates.
7. Click Connect to connect to the server you configured in the previous steps. The Connect button
is not available until you enter valid information for the server.
1. Select Use Values from DHCP Server.
2. In the Server Name/IP box, type the FTP Server Name/IP.
3. In the Path and Filename box, type the path and file name of the image.
4. In the Server Port box, type the FTP server port.
5. In the User ID and Password boxes, type the user ID and password required by the FTP file server.
6. To automatically update the image each time the terminal is restarted, select Automatically check
for updates on startup. This feature allows you to place a single, updated image on an FTP site
and have clients automatically check that site at boot-up and update with the new image.
7. Click Update to begin the update process.
The DHCP Options dialog allows you to set the DHCP tags that identify the FTP location of the update
image.
To change the FTP option IDs, type over the entry in the Server Port box, and then click OK. The value
must match what is set up on the DHCP server.
Terminal Server Client Licenses
The Terminal Server Client Licenses dialog box allows you to view stored licenses. You can use this
window to delete or save licenses.
56 Chapter 4 Control Panel