Filter
Top Products
Chapter 2 Hardware Installation
2.1 Panel Layout
2.1.1 Front Panel
Figure 2-1 Front Panel
LED:
LED Function Color Status Description
POWER Power indication Green On
Power is being applied to this
product.
M1 System status 1 Orange Blinking
This product is functioning
properly.
WLAN Wireless activity Green Blinking
Sending or receiving data via
wireless
On
An active station is connected to
the corresponding LAN port.
Link/Act.
1~2
Link status Green
Blinking
The corresponding LAN port is
sending or receiving data.
10/100 Data Rate Green On
Data is transmitting in 100Mbps
on the corresponding LAN port.
Port:
RESET
To reset system settings to factory defaults, please follow the steps:
1. Power off the device,
2. Press the reset button and hold,
3. Power on the device,
4. Keep the button pressed about 5 seconds,
5. Release the button,
6. Watch the M1 LED, it will flash 8 times and then M1 flash once per
second.
3