Filter
Top Products
Figure 2-3 Setup of LAN connections for this product
Note: If an UPLINK port is not available, simply connect a
cross-over Ethernet cable from the AP to the switch/hub.
4. Connect this Product to the Printer
Use the printer cable to connect the printer to the printer port of this product.
(Optional)
5. Power
Connect the power code to the power outlet and turn on the power switch.
This product will enter the self-testing status automatically. In this phrase, the
indicator M1 will light on for about 10 seconds, and then the M1 will flash 3
times to represent that the self-testing has been finished. Eventually, the M1
indicator will flash once per second to stand for this product is in normal
operation.
5